Gravity Madball men's snowboard
The Madball park board with a Camrock bend understands kickers well, it can also handle boxes or railings without any problems. The popular twin is built with an all-wood core from heel to toe, edge to edge. Quality bases, edges, bends and cuts make it a well-taming freestyle beast. When Madball was in development, the main idea was to have more fun for your ride.
Camrock Bend - Combines the best of camber and rocker in one. Cam-Rock relieves the pressure of the contact points on the toe and heel, allowing a freer ride like a rocker. Camber zones, which are situated under the binding, provide greater control when driving along the edge and a sufficiently large pop.
Directional Twin - has exactly the same toe and foot shape, but with the inserts more seated backwards, allowing a greater distance from the front binding to the tip of your board, which gives you better control when riding all-mountain.
Poplar Woodcore - a traditional wooden poplar core gives snowboards optimal rigidity while maintaining low weight.
Biax (0 ° / 90 °) - the most commonly used method of lamination gives the snowboard quality pop and light torsional flex. Thanks to this, the board turns easily and you will enjoy a lot of fun with it on the slopes and in the snow park.
Urethane Sidewall - 360 ° polyurethane sidewall protects the edge and side of the core from damage, better transfers energy from edge to edge and dampens vibrations better than traditional ABS sidewalls.
Prewaxed Base - all our snowboards are waxed at the factory and ready for immediate use.
153 | 156 | 159 | 160W | 161 | 164W | |
---|---|---|---|---|---|---|
Rider weight (kg) | 60-80 | 65-85 | 70-90 | 75-95 | 75-95 | 80-100 |
Contact edge (cm) | 119 | 121 | 123 | 122.6 | 125 | 125 |
Tip width (cm) | 29.1 | 29.3 | 29.8 | 30.7 | 30.2 | 31.3 |
Center width (cm) | 24.8 | 24.9 | 25.4 | 26.4 | 25.7 | 27 |
Heel width (cm) | 29.1 | 29.3 | 29.8 | 30.7 | 30.2 | 31.3 |
Cutting (m) | 7.7 | 7.8 | 7.9 | 8.1 | 8.1 | 8.1 |
Attitude range (cm) | 51-59 | 52-60 | 52-60 | 51-59 | 53-61 | 53-61 |
Set back (mm) | 10 | 10 | 10 | 10 | 10 | 10 |
Inserty | 4 * 2/20 | 4 * 2/20 | 4 * 2/20 | 4 * 2/20 | 4 * 2/20 | 4 * 2/20 |
Hardness | 5 | 5 | 5 | 5 | 5 | 5 |